SSAFPAK Aviation Fuel Contamination Test Kit - 86500-3

Details

Flash Point (ASTM D3828):
A Setaflash Series 3 Closed Cup Flash Point Tester provides either a go/no-go test, or can determine the actual flash point of the sample. The Setaflash is a laboratory standard instrument featuring an automatic flash detection system that provides a result in two minutes. A power inverter is included to allow operation from a 12V DC supply.

Contamination:
A Seta Detector Module, designed to fit into the cup of the Setaflash Series 3 Closed Cup Flash Point Tester, provides an indication of contamination of gasoline by kerosine or kerosine by diesel fuel by comparing residues after evaporation.

Density:
A digital meter is provided to measure the density of the sample.

Conductivity (ASTM D2624):
A Stick Conductivity Sensor (99580-0) measures the conductivity of the sample, verifying that it remains within specification after the addition of static dissipator.

Water Content:
Shell Water Detection Capsules indicate the presence of finely dispersed undissolved water in aviation fuel by a simple colour change, providing a rapid go/no-go result. A 5 ml sample is drawn through the capsule, and the intensity of the colour change gives an approximate indication of the level of contamination, with 30 ppm water easily detectable.

Microbial Activity:
Simple to use test paddles provide a go/no-go test for Hormoconis Resinae (HR) in the sample. Each paddle has two test pads, low test has a cut-off at 150 µg/l and high test has a cut-off >750 µg/l HR in fuel.

Supplied with:
Beakers
Wipes
Safety glasses
Gloves
Carry case
Instruction manual