Seta Oil Test Centrifuge – 6 place - 90100-0

Name: Seta Oil Test Centrifuge - 6 place
SKU: 90100-0
Availability: InStock

Methods

ASTM D91

ASTM D893

ASTM D1290

ASTM D1796

ASTM D2273

ASTM D2709

ASTM D2711

ASTM D4007

ISO 3734

ISO 9030

The Seta Oil Test Centrifuge is a heated chamber centrifuge used to determine water and sediment in oils. The large diameter chamber, with six place rotor and cushioned adaptors allows the use of 6 and 8 inch conical, pear-shaped, trace sediment and 12.5 ml tubes.

The swing out rotor ensures that samples are held near vertical when at rest allowing precise measurement of sediment. The centrifuge features a hinged lid that opens to the fully upright position to allow easy loading and unloading of tubes between tests.

Speed, temperature and timing are microprocessor controlled. Run parameters are entered via a liquid proof 'touch panel' and digital display.

Click here for 4-place Centrifuge >

View accessories required for each test method >

Seta Oil Test Centrifuge – 6 place - 90100-0

Download brochure Request a quotation

Features

Isothermal heaters fitted internally to the centrifuge chamber
Temperature control using unique algorithm to compensate for air resistance heating
6 place swing out rotor
Static, near vertical bucket positioning
Specifically designed for testing oils
Heated chamber, ambient to 80 °C
Pre-heat facility to ensure bowl is at test temperature prior to test
Universal buckets for 12.5 ml, 6 and 8 inch glassware
Microprocessor control with 99 memories
Optional trolley

Information

Feature information Details of methods Specifications

Details

Precise heating for accurate results
Isothermal heaters fitted internally to the centrifuge chamber give precise temperature control to within +/-1 °C.

Fast and easy operation
9 programme memories allow a user to configure the instrument to automatically operate to the specified test parameters, saving time, easing operation and assisting repeatability. A 'Quick Run' mode allows short runs of up to 99 seconds.

Safety features
A motor driven lid latch with a safety interlock prevents the centrifuge operation while the lid is unlocked. Imbalance detection and over-temperature protections protects the motor and chamber from damage.

Setafuge Hazard Reduction System
The optional Setafuge Hazard Reduction System (90010-0) can be fitted into the centrifuge to extract vapours from the chamber and significantly reduce vapour hazards.

Supplied with;
Rotor
Buckets and cushions

Details

ASTM D91	Standard test method for precipitation number of lubricating oils
ASTM D893	Standard test method for insolubles in Used Lubricating Oils
ASTM D1290	Standard test method for sediment in water-emulsion polishes by centrifuge
ASTM D1796	Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D2273	Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D2709	Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D2711	Standard Test Method for Demulsibility Characteristics of Lubricating Oils
ASTM D4007	Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ISO 3734	Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge methods
ISO 9030	The Oil Test Centrifuge is a microprocessor controlled, programmable, heating centrifuge that meets the above standards

Details

Maximum Relative Centrifugal Force (RCF)	2210 g
Maximum Rotational Speed	3000 rpm
Temperature Range	Ambient +5 °C in the range of 20 to 80 °C (1 °C steps)
Timer Range	10 sec to 100 hours or continuous operation
Control	Microprocessor with 99 memory capacity
Capacity	6 Samples
Voltage Range	230 Vac, 50/60 Hz (Optional transformer for 110/120 V)
Power	950 W
Size (HxWxD)	410 × 560 × 640 mm
Weight	72.5 kg
CCCN Code	Tariff 84211970