Product

MTVM – Gas Oil 500 ml - 99851-0

Methods
ASTM D86
ASTM D93
ASTM D97
ASTM D445
ASTM D1744
ASTM D2500
ASTM D4052
ASTM D5771
ASTM D5772
ASTM D5773
ASTM D5949
ASTM D5950
ASTM D6079
ASTM D6371
ASTM D6749
ASTM D6892
IP 34
IP 71
IP 123
IP 219
IP 309
IP 365
IP 438
IP 444
IP 445
IP 446
IP 450
EN 116
EN 14078
EN 23015
ISO 2719
ISO 3015
ISO 3016
ISO 3104
ISO 3405
ISO 12156-1
ISO 12185

Produced in general accordance with the principles of ISO 17034 and ISO Guide 35, the Multi Test Verification Material (MTVM) Gas Oil provides certified values for multiple test methods and has been characterised using a network of competent laboratories to provide international traceability. It is a highly cost effective solution to help meet verification requirements for audited laboratories and those which comply with ISO 17025.

Multi Test Verification Materials (MTVMs) allow routine monitoring of instrument performance and are also particularly helpful in training personnel on new equipment and test methods. The purchase of MTVMs is recommended with new instrumentation to assist with installation and commissioning.

Incorrect determination of a result can have far reaching financial and safety implications. The growing use of automated instrumentation increases the possibility that incorrect results may go undetected and in addition the early indication of bias is a useful warning to minimise production ‘giveaway’.

Seta MTVMs are unique because, unlike most other certified reference material that are only suitable for validating a specific parameter/value, Seta MTVMs enable a user to validate different tests and instrumentation using the same sample material.

Certification: the Multi Test Verification Material (MTVM) Gas Oil is supplied with a certificate of measurement which gives the certified value for each test method covered by the material.

Suitable for use with a number of Seta instruments including the Setastill Distillation (11860-3) and the PM-93 Pensky-Martens Flash Point Tester (35000-0).

MTVM – Gas Oil 500 ml - 99851-0

Features

  • Cost effective solution to verification requirements
  • Cross-check instrument performance
  • Assistance for operator training
  • Supports full compliance to ASTM, IP, CEN and ISO test methods
  • Supplied with full documentation including SDS
  • Tamper evident security packaging
  • 2 year shelf life from manufacture

Information

Details

ISO 3104 Kinematic Viscosity of Transparent and Opaque Liquids and the Calculation of Dynamic Viscosity
ASTM D5772 Standard test method for cloud point of petroleum products ( linear cooling rate method)
ASTM D86 Standard test method for distillation of petroleum products at atmospheric pressure
IP 123 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000)
ISO 3405 Distillation of Petroleum Products
ISO 2719 Flash Point by Pensky-Martens Closed Tester
EN 23015 Cloud Point of Petroleum Oils
ISO 3015 Cloud Point of Petroleum Oils
ISO 3016 Pour Point of Petroleum Oils
IP 309 Diesel and domestic heating fuels - Determination of cold filter plugging point
EN 116 Cold Filter Plugging Point of Distillate Fuels
ASTM D93 Standard test methods for flash-point by Pensky-Martens closed cup tester
IP 34 Determination of flash point - Pensky - Martens closed cup method (ISO 2719:2002)
ASTM D6371 Standard test method for cold filter plugging point of diesel and heating fuels
ASTM D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
IP 450 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part I: Test Method
ISO 12156-1 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
IP 438 Petroleum products - Determination of water - Coulometric Karl Fischer titration method
ASTM D1744 Standard test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2000)
ASTM D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
IP 444 Determination of the cloud point of petroleum products - Automatic stepped cooling rate method
ASTM D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
IP 446 Determination of the cloud point of petroleum products - Automatic constant cooling rate method
IP 219 Determination of cloud point
ASTM D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
ASTM D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
ASTM D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ASTM D6892 Standard Test Method for Pour Point of Petroleum Products
IP 71 Determination of kinematic viscosity
ASTM D4052 Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
IP 365 Density and Relative Density of Liquids by Digital Density Meter
ISO 12185 Crude petroleum and petroleum products -- Determination of density -- Oscillating U-tube method
ASTM D445 Method for Kinematic Viscosity of Transparent and Opaque Liquids
EN 14078 Determination of FAME content in middle distillates — Infrared spectrometry method
ASTM D97 Standard test method for pour point of petroleum products.
ASTM D2500 Standard test method for cloud point of petroleum products and liquid fuels
IP 445 Determination of the cloud point of petroleum products - Automatic linear cooling rate method

Details

Density at 15 °CRange: 0.83 to 0.854 g/mL Amount/test: 2 mL
Distillation IBPRange: 160 to 190 °C Amount/test: 100 mL
Distillation 50%Range: 255 to 290 °C Amount/test: 100 mL
Distillation 90%Range: 319 to 350 °C Amount/test: 100 mL
Distillation FBPRange: 347 to 385 °C Amount/test: 100 mL
Distillation ResidueRange: 1.25 to 1.42% vol Amount/test: 100 mL
Distillation LossRange: 0.26 to 0.7% vol Amount/test: 100 mL
Flash PointRange: 56 to 80 °C Amount/test: 75 mL
Cloud PointRange: -17 to -4 °C Amount/test: up to 38 mL
CFPPRange: -30 to 0 °C Amount/test: 45 mL
Pour PointRange: -33 to -6 °C Amount/test: up to 45 mL
Kin Visc 40 °CRange: 2.3 to 3.5 mm2/s Amount/test: up to 40 mL
Lubricity HFRRRange: 212 to 512 µm Amount/test: 2 mL
Water Karl FischerRange: 23.4 to 63.9 mg/kg Amount/test: 5 mL
CCCN CodeTariff 38229000

Methods

ASTM D86
ASTM D93
ASTM D97
ASTM D445
ASTM D1744
ASTM D2500
ASTM D4052
ASTM D5771
ASTM D5772
ASTM D5773
ASTM D5949
ASTM D5950
ASTM D6079
ASTM D6371
ASTM D6749
ASTM D6892
IP 34
IP 71
IP 123
IP 219
IP 309
IP 365
IP 438
IP 444
IP 445
IP 446
IP 450
EN 116
EN 14078
EN 23015
ISO 2719
ISO 3015
ISO 3016
ISO 3104
ISO 3405
ISO 12156-1
ISO 12185

Download product profile

To view our full range of products, download our latest Product Profile here.

Product profile image

Want to know more?

View our full range of products, or simply get in contact with us for more information.

Features equipment