Aviation
chevron_rightProduct
Setaflash Series 3e Flash Point Tester - 30020-0
Methods
ASTM D3278
ASTM D3828
ASTM D7236
ASTM D8174
IP 523
IP 524
IP 534
CLP Regulations EC No 1272/2008
EPA 1020 B
ISO 3679
ISO 3680 (Obs)
SW-846 1020C
The Setaflash Series 3e closed cup flash point tester is a compact, bench top/portable instrument used to carry out 'flash/no flash' tests and determine flash point temperatures.
The Series 3e can perform tests at temperatures ranging from 0 to 300 °C (with the 13870-0 Seta Cooling Module allowing temperatures below ambient).
Operated by a touchscreen, icons guide you through the simple test procedure, with a test taking less than 2 minutes with just 2 or 4 ml of sample required. Up to 10,000 test results can be saved in the instruments internal memory which can be saved and transferred via USB port for data analysis.
Learn more about flash point testing and which instrument you should be using >
Why flash point autosamplers do not comply with flash point test methods >
Setaflash Series 3e Flash Point Tester - 30020-0
Features
- Electric ignition
- Ambient to 300 °C
- Small sample size
- Under 2 minute test
- Simple operation
- Compact, rugged, portable design
- Suitable for unknown samples using ramp mode
- Automated flash detection
- Automatic barometric pressure correction
- Colour touchscreen
- USB port and result storage
Information
Details
Ease of use:All functions on the Series 3 including test parameters, instrument status and test results are accessed via the touchscreen display and push button. An audible prompt sounds when a flash is achieved and an automatic flash detector enhances repeatability.
Calibration and verification:
Calibration of the Series 3 can be performed in the field, eliminating the costs and time associated with sending the instrument to a service centre.
Service and maintenance:
The rugged design ensures minimal operational maintenance in needed.
Supplied with: 2 ml syringe, ignitor, Allen key, mains lead, quick start guide and instruction manual
Details
| ASTM D3278 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus - paints, enamels, lacquers, varnishes, and related products |
|---|---|
| ISO 3680 (Obs) | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Test for flash/no flash (rapid equilibrium method) |
| ISO 3679 | Determination of flash point. Rapid equilibrium closed cup method |
| ASTM D3828 | Standard Test Methods for Flash Point by Small Scale Closed Tester |
| IP 523 | Determination of flash point. Rapid equilibrium closed cup method |
| IP 524 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Test for flash/no flash (rapid equilibrium method) |
| ASTM D7236 | Flash Point by Small Scale Closed Cup Ramp Method |
| IP 534 | Flash Point by Small Scale Closed Cup Ramp Method |
| CLP Regulations EC No 1272/2008 | European Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures |
| ASTM D8174 | Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester |
| EPA 1020 B | Standard test methods for flash point by Setaflash (small-scale) Closed-Cup apparatus |
| SW-846 1020C | Standard Test Methods for Flash Point by Setaflash (Small Scale) Closed-Cup Apparatus |
Details
| Temperature range | Ambient to 300 °C |
|---|---|
| Temperature ramp mode | Automatic or custom settings (ramp rate: up to 6 °C/min and beep rate: up to 5 °C/B intervals) Extended test range, 100 °C from start temperature |
| Temperature selection | °C or °F |
| User interface | Colour LCD display - touch screen sensitive |
| Navigation | Control knob (rotational and push-down) |
| Data storage | 1GB (internal memory and integrated USB port) |
| Sample size | 2 ml or 4 ml |
| Pressure correction | Automatic pressure correction |
| Voltage | 110 to 250 V a.c~50/60 Hz (universal) |
| Power | 200 W (Max.) |
| Size (HxWxD) | 19.5 cm x 29.5 cm x 14 cm |
| Weight | 3 kg |
| CCCN Code | Tariff 90268020 |
Methods
ASTM D3278
ASTM D3828
ASTM D7236
ASTM D8174
IP 523
IP 524
IP 534
CLP Regulations EC No 1272/2008
EPA 1020 B
ISO 3679
ISO 3680 (Obs)
SW-846 1020C
Industries
Spares and accessories for Setaflash Series 3e Flash Point Tester - 30020-0
Download product profile
To view our full range of products, download our latest Product Profile here.
Want to know more?
View our full range of products, or simply get in contact with us for more information.
