+44 (0)1932 564391

Find your local representative

H2S Analyser

Part Number SA4000-3

IP 570 - Determination of Hydrogen Sulfide in Fuel Oil – Rapid Liquid Phase Extraction Method

The H2S Analyser was originally developed in cooperation with Lloyd’s Register’s ‘Fuel Oil and Bunker Analysis Service’ (FOBAS) along with support of other major international oil companies to offer rapid measurement of H2S in liquid petroleum products.

The H2S Analyser is an excellent tool for supporting Quality Control and safety ensuring product is within approved specification. Rapid repeat sample measurement means it can also be used to assist product remediation treatment of feedstocks and off specification product.

H2S is efficiently purged from the test sample by a combination of heat and agitation, and is measured by a proprietary advanced gas specific detector. The instrument offers a cost effective solution for H2S measurement – no costly or hazardous chemicals are required and there is no need for analytical preparation by an experienced chemist.

The Vapour Phase Processor (VPP)

IP 570, procedure A includes the VPP accessory which provides a more robust specification tool for monitoring H2S. This is achieved by removing any interfering chemicals such as toluene, xylene or Mercaptans which can damage the sensor and ‘interfere’ with readings. Additionally the VPP can be used to address a broader range of petroleum products.

H2S Analysis of Crude Oil ASTM D7621, appendix X1

The H2S Analyser combined with the VPP offers a fast and robust means of determining H2S levels to ensure effective evaluation and treatment of Crude oil. The instrument provides a cost effective alternative to traditional methods which typically are unable to identify entrained H2S especially at low gas levels.

H2S – Global Proficiency Testing Scheme

The SETA H2S PTS scheme provides global inter-laboratory comparison of test results and performance. Participation acts as a quality assurance programme enabling users to continually monitor and validate instrument performance and results in accordance with ISO/IEC 17025.

Vapour Phase Processor >

Analysis of H2S in Crude Oil >

H2S-Global Proficiency Testing Scheme >


H2S Analyser principle of operation
1. Load a sorbent cartridge and press start on the VPP
2. The VPP cools the cartridge to the required temperature
3. Type in the sample information on the H2S Analyser
4. When the VPP is ready inject the sample into the test vessel, press start on the H2S Analyser
5. When the test finishes the results are displayed

Automatic test result and error reports
The test is initiated by pressing the START/STOP Button, sample analysis is fully automatic and results are stored to memory at the end of the test. The Analyser software automatically detects leaks in the system and produces error codes and alerts if sample/test analysis is void. Results can be printed out or downloaded via the RS232 interface.


Measurement range 0-250 mg/kg H2S in the liquid phase (0-250 ppm H2S)
Operating limits 5 – 40c maximum (80% RH)
Viscosity Range Up to 3000 mm2/s
Principle of measurement Advanced Electrochemical sensor
Test duration 15 minutes
Sample size 1 ml, 2 ml, 5 ml (depending on H2S concentration)
Diluent volume 20 ml
Voltage 12 Vdc, supplied with universal A/C transformer
Power 60 W max
Computer interface RS232
Size (HxWxD) 220 x 290 x 380 mm
Weight 8 kg
CCCN Code: Tariff 90268020


IP 570Determination of hydrogen sulfide in fuel oils - Rapid liquid phase extraction method
ASTM D7621Determination of Hydrogen Sulfide in fuel oil - rapid liquid phase extraction method
ISO 8217Fuel Standard for marine distillate fuels and for marine residual fuels
H2S Analyser  IP 570 ASTM D7621


Measurement range from 0-250 mg/kg H2S (0-250 ppm H2S) in the liquid phase
Vapour Phase Processor proven to eliminate effects of chemical interference
A non chemical method, no wet chemistry involved
Small lab bench footprint, fully portable operation
Suitable for monitoring residual marine fuel blends, Crude Oil, refinery feedstock components, cargoes & products in the distribution system
Critical Measurement method for Product Safety and Release


ASTM D7621, IP 570, ISO 8217


Petroleum - Fuels & Oils

Chemicals & Solvents


Copyright Stanhope–Seta Limited 2014